Purpose and Application
Pumping fluids/solutions in chromatography
Pumping fermentation broth
Pumping chemicals in recirculation experiment
A wide range of application, from laboratory to plant, etc
Features
Perista Pump is a registered trademark of ATTO corporation.
From 1 to 4 channels available
Flow rate ranges from 5 to 1500mL/hr for each channel using silicone tube with 1 to 3 mm bore and 1 mm thickness
Equiped with a connector for external control (DC 0-5V)
 
AC-2110 II Perista Pump (High Flow Rate)
Flow rate
5 - 1,500 mL/h (Inner diameter φ1~3 mm silicone tube)
Motor
DC Motor
Channel
1 to 4 channels available
vertical pumping height
21 m max
Viscosity of transported fluid
1.5 Pa · s (1,500 cP) max
Maximum pressure
Discharge 205.9 kPa (2.1 kg/cm²) / Suction 9.8 kPa (0.1 kg/cm²)
Environmental temperature
0~40℃
External control
0 - 5 V DC, TTL control of FLOW/STOP
Accuracy of flow rate
Accuracy of repetition within ±1%
Drive circuit
DC servo system
Power
AC 100-240V 50/60Hz 12VA
Dimension
110 (W) x 150 (D) x 235 (H) mm (for single channel pump)
Weight
1.5 kg (0.025 kg per channel)